05.05.09 - What's new?

Well, it's been some time since I recorded my news and thoughts. In some ways a lot has happened since I finished at the RCA, and in some ways not enough.
My work has been shown by Adrian Sassoon at various Art and Design Fairs in the UK, USA and Belgium. They were shown recently at SOFA in New York and will be at COLLECT in London in 2 weeks time. I'll have some new work on show.
It's also just about to go on display in 'Object Factory' at the Museum of Arts and Design in New York
I have divided my time between designing new work, trying to complete an AHRC Knowledge Catalyst application to undertake another 12 months applied research at the RCA and collaborating with Axiatec and the University of Washington on material tests.













Here is an image of my test cube designed, printed on the ZCorp 450 in France. It has been treated to make it heat resistant, then I have dipped it in vitreous slip, fired it to 1000C, then glazed and fired it to 1085C with one of our lovely lead glazes.














This test piece is based on my 'Event Horizon' torus piece. Again, it was printed on a ZCorp machine, but in clay, not in the usual 131 powder. It was then biscuit fired to 1000C and treated in the same way as the test cube above.
This morning I sent 2 of the torus test pieces to the Esther Klein Gallery at the Science Center in Philadelphia, USA for an exhibition called 'The FAB Show'. The exhibition will explore Creative and DIY methods of accessing and utilising 3D printing technology. We are working with Evan Malone of Fab@Home on the exhibition, along with folks from MakerBot, RepRap, and Candyfab.

Meanwhile, if anyone out there is interested in my work and research please don't hesitate to get in touch. I am looking for a position, either temporary, permanent, part-time or full time where I can contribute my experience, enthusiasm and knowledge.

11.07.08 – My last week at College…

…for the time being.

I spent the week:

• Finishing off the slumped glass insert for a cylinder piece.
• Sorting out my desk, going through all my amassed written stuff, rationalising all the catalogues, essays etc. that I had collected over the 2 years.
• Meeting up with Nadia and Jeremy from InnovationRCA to discuss other sources of funding as I had narrowly missed the Materials Innovation Fellowship. There’s an AHRC Knowledge Catalyst scheme that seems to be perfect for our project. It is going to take some organising as The College and the ‘Enterprise Partner’, i.e. the French company have to complete the application form. I will be the ‘Employee’ so don’t play an official part in the process.
• Packing all my work, tools, materials etc. and finding a van hire company who charge less than £200 for a one-way journey to Kendal!
• And saying good-bye to fellow students. I’m sure I’ll see many of them again and really hope our paths will cross, as they have been a great bunch of talented people.
• Giving a bit of help to Ray and Jeannette by moving pots & furniture around the house in preparation for the replacement of some floorboards and all the carpets.
• Driving the van north for over 6 hours. It felt a bit strange to have to find places for all my London bits and pieces, especially as I don’t know if I’ll be needing to take it back down there in October.

The weekend was spent sorting it all out, then mowing the lawn, picking raspberries up in the woods and generally easing myself into Parkside life again.

27.06.08 – Research funding

My first weekend at home for many weeks was blessed by terrible weather, cold, strong winds, grey skies and rain. My brother, sister-in-law and new nephew were over from Austria and though they had had a couple of pleasant days, the weather didn’t help in finding things to do with them on Saturday.
Back at College on Tuesday I met Martin to discuss the Innovation Fellowship application. It originally had to be in by Wednesday, but the deadline was extended during the day to Thursday. In one respect I was disappointed as I thought it might reduce my chances, but it meant that I had a bit longer to complete it.
Wednesday was a hectic day, attending the 3D technologies discussion day at the University of the West of England. I gave a short presentation at the end of the day, which attracted some attention, particularly from David Huson, a researcher from Bristol who is specialising in the 3D printing of ceramic materials. At some point in the near future we plan to discuss our projects.
The remainder of the week was focused on the application, Thursday passed in a blur and when Friday came I ran through my application, got some pieces ready for the interview and waited to be called. Eventually the phone rang and down I went to InnovationRCA. Geoff Hollington who I’d met at MaDE was the first of the panel to greet me. From my perspective the interview went well, I think I enthusiastically communicated the important points. Sat writing this on the train north I’m waiting to hear their decision. I’m really not sure of what chance I have, there could be some bright spark who has discovered some whizzy new material, all I can do is wait. It would put my mind at rest to get the Fellowship as I have been promised funds from the French company in order to develop a UK branch of the business. Together I should have a financially secure year ahead, with a very good chance of developing some interesting projects. If I don’t get the fellowship, then it’s back to looking for sponsorship.

20.06.08 – Still crazy…

I thought that things might have eased off a little after the show and my exam, but the absence of updates to my blog testifies to how busy things have been.
The aftermath of the show has involved responding to a flow of enquiries from magazines from various parts of the world, arranging for collection of work sold and continuing to put together a research project for next year. I have had to delay the Wedgwood work, as my trip to France meant that I couldn’t meet one of the people that I need to see in order to finalise things.
My examiners had asked for a small revision to the Introduction of the written report, so that went backwards and forwards between Martin, Alison and myself during the early part of the week. It was a pleasant feeling to hand in a final printed copy to the research office on Tuesday.
In the evening I had been invited to the Design London networking evening at Imperial College. Jeremy Myerson from InnovationRCA was there and told me about the Materials Innovation Fellowship sponsored by the London Design Festival. The deadline for applications is Wednesday next week, with interviews on the Friday. So short notice!
I also met the Waribashi group from Imperial who have developed a way of converting previously un-recyclable waste into a very useful material. I was interested to have a conversation with them about using the non-fired ceramic coating with their product. They are interested and willing for tests to take place.
On Wednesday morning it was up and off to Standsted for my flight to Limoges where I was visiting the company who produce the materials used in my Wedgwoodn’t project. At the College (ENSCI) I met Youssef, their new director of research who has been undertaking some very interesting experiments, but more of that at some later stage.
On Thursday we took a trip to Moulins-Yzeurre in the Auvergne to visit a Lycee with an amazing glass department. They become the official French National School of Glass in September and wish to form links with the RCA. They run technically based courses with strong links to industry but need to develop their design and innovation side of the teaching.
I managed to get a WiFi connection whilst in Limoges and download the Innovation Fellowship form, so spent some time thinking about that.
On Friday I actually got home for the first time in 4 or 5 weeks, it was a beautiful evening, the low light bringing out the folds in the land below our house. The garden had grown, (surprise, surprise) and was looking great.
My brother, sister-in-law and nephew were across from Austria for a few days and on Saturday I cooked lunch for them. Vicky unfortunately had to work, but we went round to my parents in the evening for a glass of wine with them. The weather over the weekend was terrible, cold, wet and very windy which didn’t help especially as I realised that I was absolutely knackered from all the activity of the past few weeks.

13.06.08 – The Exam

RCA SHOW ONE finished on Sunday evening and everything was packed away, so when Monday came I was free to concentrate on preparing for my exam on Thursday.
I had been advised to re-write my presentation, concentrating on the outcome of the project and future plans, with less emphasis on the background to it.
I discussed the mock exam with Alison on Monday, Liz on Tuesday and Martin on Wednesday, so had pretty consistent opinions of what I needed to say.
When Thursday came I was actually feeling relatively relaxed, certainly far more prepared than for last Thursdays mock exam. I had arranged both test and finished pieces in the Seminar Room and when the panel came in asked them if they would like to inspect the work. The panel was made up of Jeremy Ainsley, the Head of Vehicle Design, who chaired the meeting, Mike Hose, my External Examiner and Alison Britton. My supervisor, Martin Smith sat in as an observer, but couldn’t comment or ask questions. After my presentation, the questioning was good-natured, though I struggled a bit with some of the wording of Mike Hose’s questions. At least I remembered to ask him to elaborate.
After about 45 minutes of questions they seemed happy enough to retire to consider their verdict, leaving Martin and I to discuss the proceedings. They returned ten minutes later and Jeremy Ainsley announced that I had passed. Mike Hose asked if I would re-write the Introduction to my written report as he thought it needed to describe the project in a more engaging way for future readers.
After that I was invited up to the Senior Common Room for a lovely lunch, then almost straight back to it. I had a meeting at Imperial College with Nick Leon and Carolyn Runcie of Design London to discuss my plans for a research project at the RCA next year.
Back at the RCA the research cluster greeted me with a bottle of champagne!
Then Ray and Jeannette cracked one open when I got back to the house!